CL500

Cleaning applications:

 

Stencils

Squeegee

Misprints

 

The SYSTRONIC CL500 cleaning system is the ideal system for cleaning stencils and squeegees. The automatic three-chamber cleaning system made of stainless steel sprays in a closed circuit using two rotating spray arms. In the next step, your items to be cleaned are transported through the rinsing stage into the drying chamber via a chain conveyor. As soon as the drying process has started, you can start the next process in the cleaning stage.

The system consists of a closed cleaning circuit, a closed rinsing circuit, a drying unit and a separate drain pump.

The completely separate cycles of cleaning and rinsing are a very important feature. This is the best way to prevent carry-over.

A fully demineralized water treatment system is attached to the rinsing circuit for cleaning the components in order to achieve an adjustable conductivity value for the rinsing water.

The drying takes place via convection drying using the supply and exhaust air principle.

The process chamber is loaded via a swing door.

The system is operated via a user-friendly touch panel.

 

It is the perfect model for medium and high throughputs.

 

Features SYSTRONIC CL500

 

  • Low investment volume

  • Minimal consumption of cleaning medium

  • little need for space

  • Stencil size up to 750 x 800 x 40mm

  • Automatic process

  • Programmable via touch panel

  • Short cleaning time

  • Fine filter system in the cleaning circuit

  • Easy to use, quick and economical cleaning system

CL500

Recommended cleaning media:

SYS-CLEAN BC1.0

SYS-CLEAN BC3.0

©2020 SYSTRONIC Produktionstechnologie GmbH & Co. KG.