SYS-CLEAN© MC2.0
Maintenance cleaner - concentrated
SYS-CLEAN© MC2.0 is a water-based, alkaline cleaning medium for cleaning soldering frames and devices, furnace parts and filters already at room temperature.
SYS-CLEAN© MC2.0 reliably removes burnt-in flux residues, as well as oils and greases and is specially optimised for the material-friendly cleaning of sensitive metallic components made of copper and brass in an immersion bath. SYS-CLEAN© MC2.0 removes the most stubborn dirt even with short contact times and low application temperatures.
Advantages: SYS-CLEAN© MC2.0 is ideally suited for cleaning soldering frames and fixtures as well as furnace parts and filters. The cleaner is almost odorless. Due to the very high loading capacity and the good filterability a cost effective process is guaranteed. SYS-CLEAN© MC2.0 is formulated including a defoamer and is specially formulatedwith additives for gentle cleaning of sensitive metallic surfaces.
Availability: SYS-CLEAN© MC2.0 concentrate is available in the following sizes:
- Item number: 64903652 – 5L
- Item number: 64903496 – 25L
Area of application
Pollution | Suitability |
---|---|
Lead containing fluxes | ✓ ✓ |
Lead free fluxes | ✓ ✓ |
Water soluble fluxes | ✓ ✓ |
Solder pastes | ✓ ✓ |
Oils/fats | ✓ |
Type of application
Cleaning method | Suitability |
---|---|
Spray-in-air | ✓ ✓ |
Immersion cleaning air agitated | ✓ ✓ |
Spray under Immersion | ✓ ✓ |
Ultrasonic | ✓ ✓ |
Manual cleaning | ✓ |
Application parameters
Parameter | Value |
---|---|
Application temperature | 20 - 40°C |
Cleaning time | approx. 8 - 15 min. |
Rinsing | DI-Water |
Drying | convection / compressed air |
Application concentration | 20% in DI-Water |
✓ ✓ = Excellent ✓ = Optimal O = Optional X = Not recommended
Technical data
SYS-CLEAN© MC2.0 is supplied as a concentrate.
pH-Value | 12 |
Density (at 20°C) | 0,9914 g/cm³ |
Refractive Index (at 20°C) | 1,4136 |
Flashpoint | > 100 °C |
Initial boiling point and boiling range | > 100 °C |
Data sheet
for download
- SYS-CLEAN_MC2.0.pdf303 KB
REACH
compliant
The product is free from ingredients of concern according to the SIN & SVHC lists
RoHS & WEEE
compliant
100% compliant with EU directives RoHS 1 & 2, WEEE