SYSTRONIC CL900

Single chamber – Spray in air cleaner

The SYSTRONIC CL900 cleaning system is the ideal system for cleaning misprints and assemblies. The automatic single-chamber cleaning system made of stainless steel sprays via four rotating spray arms in a closed circuit. The system consists of a closed cleaning circuit, a closed rinsing circuit, a drying unit and a separate drain pump.

After the respective process steps cleaning and rinsing, the arms are blown free with compressed air in order to avoid mixing of the cleaner and the rinsing water.

The drying takes place via convection drying using the supply and exhaust air principle.
The process chamber is loaded via a loading door that can still be folded out at the front.
This enables the cleaning basket to be easily removed.
The system is operated via a user-friendly touch panel.
It is the perfect model for medium and high throughputs.

Spacious & space-saving

Large, flexible holding capacity for the items to be cleaned
Small space requirement
Chamber size up to 500 x 500 x 600 mm
Fully automatic multi-phase process
Programmable via touch panel

Clean, fast and robust

Continuous filtration
Short process times
Made entirely of stainless steel

Rinsing & drying

Four rotating spray arms
Fine filter system in the cleaning circuit
Very good convection air drying
Conductivity depending rinsing function
Large tank volume, separate circuits
Optional as closed loop system

Technical data CL900

automatic single chamber – spray in air cleaner


External dimensions (HxWxD)	1250 x 1250 x 1880 mm
Maximum part size (HxWxD):	470 x 485 x 600 mm
Usable chamber dimension	500 x 500 x 600 mm
Exhaust air diameter	160 mm
Exhaust air flow rate	500 m³ / h
Cleaning tank	95 Liter
Rinsing tank	95 Liter
Weight	approx. 700 kg
Fine filters	2 filters with 50 cm
Cleaning medium	pH-neutral or alkaline / DI water
Noise emission	< 69 dBA
Throughput	20 cycles / day
Processing time	approx. 45-70min.
Application	PCB cleaning