SYSTRONIC CL300
Single chamber – Spray in air cleaner
The SYSTRONIC CL300 cleaning system is the ideal system for cleaning your soldering frames. The automatic single-chamber cleaning system made of stainless steel sprays via four rotating spray arms in a closed circuit. The system consists of a closed cleaning circuit, a closed rinsing circuit, a drying unit and a separate drain pump.
- After the respective process steps cleaning and rinsing, the arms are blown free with compressed air in order to avoid mixing of the cleaner and the rinsing water.
- The drying takes place via convection drying using the supply and exhaust air principle.
- The process chamber is loaded via a loading door that can still be folded out at the front.
- This enables the cleaning basket to be easily removed.
- The system is operated via a user-friendly touch panel.
- It is the perfect model for medium and high throughputs.

Spacious & space-saving
- Large, flexible holding capacity for the items to be cleaned
- Small space requirement
- Chamber size up to 500 x 500 x 600 mm
- Fully automatic, multi-phase process
- Programmable via touch panel
- Compact and user-friendly

Clean, fast and robust
- Short cleaning time
- Fine filter system in the cleaning circuit
- Easy to operate, fast and economical cleaning system
- Low maintenance
- Made entirely of stainless steel

Rinsing & drying
- Cleaning, rinsing and drying of solder frames
- Large, flexible chamber
- Closed loop system
Technical data CL300
Single chamber – Spray in air cleaner
External dimensions (HxWxD) | 1250 x 1250 x 1880 mm |
Usable chamber dimensions (HxWxD) | 530 x 485 x 60 0mm |
Tank volume | 2 x 95 Liter |
Cleaning medium | Alkaline maintenance cleaner / DI water |
Throughput | 240 frames / day |
Capacity | 8 - 10 Solder frames |
Processing time | 45 min. |
Application | Solder frames / solder masks |
Data sheets
for download
- Data_sheet_CL300_E.pdf717 KB
- SYS-CLEAN_MC1.0.pdf303 KB
- SYS-CLEAN_MC2.0.pdf303 KB
- SYS-CLEAN_MC3.0.pdf302 KB